Copper turn
By VicentaLakin
(Data used for reference purposes only, please see Tips before production. The following is about five and a half copper turns in diameter. Perfect as a little baby's skin, not a hole! It's not so hard to make this beautiful and complete copper turn-burning skin
Recipe Recommendations
- eggs one
- low-gluten flour 100g
- milk 100g
- Aluminum-free baking powder 3g
- Cranberry and sweet potato stuffing appropriate amount
- odorless liquid oil 10g
- honey 5g
- salt 1g
- powdered sugar 20g
Steps for Copper turn
1
Preparation of materials
2
Low-banded flour + powdered powder + small soda, evenly mixed and over-screened 2-3 times
3
Eggs are scattered, salt and sugar powder are added, and the mix is even
4
(b) Add a odourless liquid oil and mix it evenly
5
Add milk and continue to mix evenly
6
Dig a hole in the middle of a sifted dry powder mixture
7
(b) The liquid mixture is added in fractions, and the mixing starts with an egg-beater from the position of the middle hole
8
Until they are evenly integrated into an egg paste without powdered particles
9
The egg paste is covered with a lid or a shampoo, which is frozen in the fridge for more than 30 minutes or is spent overnight. Colded paste, very sticky. When the razor is lifted, the paste drops down, the traces do not disappear immediately. This is the first point of making perfect skin
10
The unpaved pan is placed on the stove, the little fire is heated, and then a little bit of grease is painted on the bottom of the pan with paper in the kitchen. Be careful here. You can't see the oil star at the bottom of the pot. This is the second point in making a perfect appearance
11
With a little spoon that usually drinks soup and digs an egg paste
12
Take the pot off the fire and pour it into the egg paste. It's a place where you don't spin a pot, and when the egg paste is heated, it will spread
13
Put the pot back on the stove and the little fire heats. Slowly, you can see a lot of holes in the face of the egg paste. When a small hole starts to crack, it is supported by a razor or a razor. And then you can make a pot for a little longer. And here's the thing: the hole just started to crack, and about two or three times it could turn over. When heating is done, the pot can be moved around the stove to make it more even, but in parallel, without tilting. That is the third point。
14
When the copper turn is ready, the top color is up and the net is cooled. The fourth point of a perfect skin is to prepare a rag. For every pancakes, the pot is moved from the cooker to the rag, then poured into the paste and put back on the stove with a little fire
15
- Finish all the copper tortillas, look at the surface, the top color is even and there are no air holes
16
Take two copper tortillas and put on a proper amount of pie. It's thicker in the middle, it's thinner in the surroundings, it's taped up with a little pressure, it's better to stick it together, and it's eaten。