Quinomus cake
By VicentaLakin
The heart is happiness! The green is romanticism, and it's a romantic collection of "Today's Life"s. This moose cake is the best thing to do, and hopefully a lover will finally be a family。
Recipe Recommendations
- cucumber 430 grams
- milk 200 grams
- white sugar 50 grams
- the gelatine powder 25 grams
- Oreo cookies 70 grams
- melt butter 25 grams
- cold boiled water 35 grams
- sweetening
- other
- several hours
- ordinary
Steps for Quinomus cake
1
Remove the biscuit, put it in a fresh bag and crush it with a stick。
2
Add melted butter mixed。
3
Take a six-inch heart-shaped cake mold and crush the good cookies into a mold. Put it in the freezer room for 15 to 20 minutes。
4
Ready to wash the cucumbers, cut them into particles, and put the cucumber in the machine. No water
5
It filters out cucumber mud and juice separately。
6
8 grams of fish powder, 20 grams of sugar, 35 grams of cucumber juice, and melting from water to fish glue。
7
Pumping fish glue into cucumber mud。
8
Take out the frozen cookie mold and put the cucumber mud in the mold. Put it in the freezer for another half an hour。
9
Get 200 grams of milk ready. (Note: The original is 200 grams of yogurt, and I'm afraid that yogurt and cucumber tastes bad and I'm turning to pure milk)
10
12 grams of fish powder, 20 grams of sugar, 35 grams of cold water, and melting of water into fish glue。
11
Put fish glue in 200 grams of milk and mix it。
12
It's in a freezer for half an hour. Put it back in the freezer for half an hour。
13
Five grams of fish glue, 10 grams of white sugar, 35 grams of cucumber juice melted and then mixed all the remaining cucumber juice。
14
Finally, cucumber fluids are poured into frozen moulds and returned to the freezer room of the refrigerator for an hour until the condensation is completed. If it's frozen, it takes at least four hours
15
The finished product。
16
The finished product。17
Small tip: When demodeled, the mold can be placed in a higher glass, and it can easily be removed with an electric blow to the outer edge of the mould by pushing it down for about 10 seconds。