Swan playwater

Recipe Recommendations

• Apple one
• chopsticks
• knife 1 handful

• fruity
• other
• half an hour
• ordinary

Steps for Swan playwater

1

Prepare materials and select a shape-shaped, large apple to wash with water。

2

Put it on the board, if it is cut with a knife, and remove the seeds between the two sides, without throwing them away for a while。

3

Take the half of the tail of the apple and cut the face towards the middle of two chopsticks。

4

Using a mid-tight line, the knife is vertically cut to the chopstick in one centimetre to the left。

5

If you have a knife attached to a chopstick, you cut it across to the point where you cut down the left, right, two little pieces of apple, the rest of which is for the swan body。

6

Take a small apple and put it in the middle of two chopsticks and cut out three pieces by the method of figure 3 ~ 4。

7

As in the case of an overlap, half of the wings of the swan are ready。

8

Following the above approach, the other half of the swan's wings are made and placed on both sides of the swan's body。

9

Then, at the upper end of the swan ' s body, a dent was carefully cut out with a knife to insert the swan head。

10

The other half of the apples are cut to the middle of the two chopsticks, and the chopsticks cut the apples across four。

11

Choose the second of the most beautiful pieces (not to throw the remaining three pieces in case they are cut wrongly), such as the cut three blades, the largest one, the head of the swan, and the remaining two blocks can be eaten directly。

12

With a knife, the head was slightly fixed, the neck and mouth arc were fixed, two apple seeds were decorated into the eyes of the swan, and then inserted in the groove at the front end of the swan. Haha: the apple swan succeeded。

13

First one: Left。

14

Again: Right side。

15

I'll take a picture of you。

Swan playwater Make Tips

Recipe Categories

• snack recipes