Red-tree twilight cake
By VicentaLakin
It's a thinly organized, soft-tongue cake, a classic cake, and one of the sweets that bakers must make. It's got red date particles. It's got a better taste
Recipe Recommendations
- low-gluten flour 80 grams
- eggs of 4
- corn oil 40 grams
- pure milk 75 grams
- white granulated sugar 65 grams
- lemon juice 5 grams
- salt 2 grams
- sweetening
- baking
- an hour
- simple
Steps for Red-tree twilight cake
1
Food is called spare。
2
The red dates cut the particles, and mixed the dry flour with a few fractions, so that the surfaces are evenly covered with flour。
3
Clean up the basin without water or oil, and be careful to separate the protein from the yolk。
4
White sugar is divided into 10 grams into yolk, salt and evenly mixed。
5
Pour corn oil and milk。
6
Scan low-banded flour。
7
THE "Z " FONT IS EVEN TO NO PARTICLES。
8
A few drops of lemonade in the protein, and white sugar is added three times to the high-speed ejaculation protein, and a straight angle is available。
9
PUT HALF OF ALL THE GOOD PROTEIN IN THE YELLOW PASTE. THE WORD "J" IS FLIPPED, AND IT CANNOT BE ROUNDED TO AVOID BUBBLES。
10
The remaining proteins continue to be evenly mixed。
11
Smash a few of them into the red palms, and continue evenly。
12
Into the molds, the bubbles came out on the stage。
13
9-YEN KX-32J99 ELECTRIC OVEN PREHEATING IN ADVANCE: IN THE LOWER MIDDLE, 145 DEGREES ABOVE, 140 DEGREES BELOW。
14
Bake for 60 minutes。
15
Time's up, the fragrance cake's out
16
On the surface, the heat is stunned and can be demoulded when it is cooled。
17
The finished chart。
18
The finished chart。
19
It's soft and thin and nutritious
20
The finished chart。Red-tree twilight cake Make Tips
THE RECIPE USED IS A 9-YONG KX-32J99 OVEN. THE COLOUR IS EVEN, THE TEMPERATURE IS STABLE, THE TEMPERATURE IS FIXED AND HE'S NOT UNDER CONTROL, IT'S A ONE-KEY BAKE, AND THERE'S NO TIN PAPER OR TEMPERATURE ADJUSTMENT, AND THE FINISHED PRODUCT IS JUST FINE, GREAT! RED-TREE SHREDDED PARTICLES NEED TO BE EVENLY MIXED IN THE AMOUNT OF DRY FLOUR, SO THAT THE PARTICLES CAN BE SPREAD OUT AND MEET VERY WELL. THE MOLD IS A 6-INCH-MODE-MODE-MODE-MODE-MODE。