Drafted bean paste roll
The raw materials used for wire drawing are generally fried first, and the oil must be drained after frying.
Recipe Recommendations
- red bean paste appropriate amount
- spring rolls appropriate amount
- edible oil appropriate amount
- white sugar appropriate amount
- sweetening
- wire drawing
- ten minutes
- ordinary
Steps for Drafted bean paste roll
1
Prepared ingredients.
2
Cut the spring roll skin into 4 portions with a knife.
3
Rub the bean paste into thin strips and wrap it.
4
Fry in oil pan.
5
Fry until golden and crispy on the outside.
6
Remove and drain the oil.
7
Pour off the excess oil, leave a little oil at the bottom of the pot, and add appropriate amount of white sugar.
8
Stir fry over medium to medium heat the sugar evenly.
9
Turn to low heat and stir-fry until melted.
10
The stir-fried syrup is light yellow (amber). This is the best time to add the ingredients.
11
Pour in the bean paste roll, stir quickly until the sugar juice is evenly coated, and remove from the heat.
12
Come to draw silk!13
Crispy on the outside and full of bean paste aroma.